Manpage of MODULEDTMFREPEATER.CONF
Section: File Formats (5)
Updated: MAY 2011
Return to Main Contents
ModuleDtmfRepeater.conf - Configuration file for the SvxLink server DTMF
is a general purpose voice service system for ham radio use. This man-page
describe the SvxLink server configuration for the DTMF Repeater module.
The DTMF Repeater module retransmits all received DTMF digits. This can be used
to control remote systems that is also DTMF controlled. The DTMF muting feature
should be used on a repeater to not retransmit the received DTMF audio.
There are a couple of configuration variables that are common to all modules.
The documentation for these can be found in the
The amplitude, tone length and tone spacing of the generated DTMF digits is
configured in the configuration section for the LocalTx that is actually
transmitting the DTMF. Have a look at the documentation for the
configuration variables for a full explanation.
Here is the description of all module specific configuration
variables that the SvxLink DtmfRepeater module understands.
Specify a time, in milliseconds, that the DTMF Repeater module will wait after
squelch close before retransmitting received DTMF digits. If zero or not
specified, SvxLink will try to send the digits as soon as they are received.
- /etc/svxlink/svxlink.conf (or deprecated /etc/svxlink.conf)
The system wide configuration file.
Per user configuration file.
Global modularized configuration file. Depends on the CFG_DIR configuration
Per user modularized configuration file. Depends on the CFG_DIR configuration
Tobias Blomberg (SM0SVX) <sm0svx at users dot sourceforge dot net>
- CONFIGURATION VARIABLES
- SEE ALSO
This document was created by
using the manual pages.
Time: 16:10:17 GMT, June 30, 2014